TRE Pre-Preg Carbon Fibre Rear Diffuser For BMW M2 & M2 Competition (2015-2021, F87)

Installation takes approximately 20 minutes. On each end of the OEM diffuser, it’s attached underneath by one 8mm hexagon bolt. Remove both. Then remove the 6 plastic pop rivets using a pry tool. Six rivets and two bolts in total. Start by pulling both the far left and right sides of the diffuser first, as these clips will pop out easily. Then work carefully to remove the centre clips of the diffuser – these are much tighter and will require more force.

Once removed, install the new AUTOID rear diffuser with the bolts and rivets from the original diffuser.

• BMW M2 (2015-2018, F87)
• BMW M2 Competition (2018-2021, F87)